Home » Packaging Equipment » Shrink Wrappers » Automatic Form-Fill-Seal Shrink Wrapper » Shanklin Triumph 2

Shanklin® Triumph 2

Automatic Form-Fill-Seal Shrink Wrapper with T-71 Tunnel

The Shanklin Triumph 2 Automatic Form-Fill-Seal shrink wrap machine is a great solution for packaging needs that require more advanced features than an L-Sealer but fewer features than a High Speed Automatic Wrapper. The Shanklin Triumph 2 offers speed, flexibility and high performance. The added T-71 Shrink Tunnel will assist with shrinking high volume, heat absorptive surfaces and irregular shaped packages.

The T-71 has a longer single chamber which increases shrink capacity at higher speeds. Also, the fully controllable air temperature allows you to customize shrinking conditions to the application.

 Triumph 2 Form Fill Seal Shrink Wrapper with the T-71 Shrink Tunnel

Shanklin Triumph 2 Features

  • 90 feet/Minute Belt Speed
  • Pack up to 60 Packages per Minute.
  • Easy Access Hood Design
  • 25 Recipe Storage
  • SmartWire or Hot Knife End Seal
  • Shanklin Sabre® Side Sealer
  • EZ Load Film Unwind: Easy Shrink Film Changeovers
  • Multi Language Operator Interface
  • Picture Based Touch Screen
  • Recessed Selvage Winder: Full and Break Detection Systems
  • Tool-less Adjustments
  • Batch Counters
  • Smart Carriage: Machine Speed Adjusted Without Impacting End Seal Settings
  • Safety Devices: Emergency Stops, Seal Jaw Safety Switches, Protective Guards, and Safety Interlocks on All Access Panels

Shanklin Triumph 2 Specifications

  • Minimum Product Size: 3”x 2”x 1//8”
  • Maximum Product Size: 48” x 15” x 7 ½”
  • Maximum Shrink Film Width: 21" Folded or 42" Flat
  • Conveyor Height: 32 1/2" min. to 40 1/2" max
  • Packaging Speed: Up to 60 Cycles per Minute
  • Shrink Film Speed: 27 meters per minute
  • Power: 230 volts, 1 phase, 50/60 hz, 20 amps
  • Compressed Air: 3 C.F.M. dry air @ 70 psi 5.1 Nm3/h @ 4 bar
  • ¾ HP AC Motor

Shanklin Triumph 2 Accessories

  • Casters
  • EZ Load Infeed Table
  • Venturi Vacuum Scrap Transfer
  • Level Bottom Jaw with Short Product Transfer
  • Print Registration
  • EZ Load Compact Centerfolder
  • Dual Roll Compact Centerfolder
  • Wide Belt In-feed Conveyer
  • Flight Lug In-feed Conveyor
  • Flight Bar In-feed Conveyor

T-71 Features

  • Longer (60″) single chamber tunnel
  • Conveyor speeds from 25 to 150 feet/min
  • Powerful hot air system

T-71 Specifications

  • Tunnel size 36”Wx68 1/2”Hx92”L
  • 92” long conveyor
  • 230V, 53 Amps
  • 1 ½ HP motor