The LD-3SB is a semi-automatic uniform case sealer / case taper by Loveshaw Little David. It is a reliable side belt drive uniform taper designed for long production runs of uniform sized cases/ boxes and carton.
This case sealer is often found where boxes are either high profile, lightweight or unstable.
Reliable Performance - Warranty
2 Years Gear Reducer and motor
3 Years Cartridge*
Tapes boxes from 4-1/2" (114mm) to 24" (610mm) in height
Uses pressure sensitive tape
Plug in operation
Minimal operator training required
Sealed drive system
CaseLocker ST® tape cartridge requires no lubrication
Single mast design allows clear access
Knife guard system of the CaseLocker ST® tape cartridge only allows the blade to be exposed only when the rollers have been depressed
High mast for box heights to 34" (864mm)
Front and rear standard or roller pack table
NEMA 4, NEMA 7
3-1/4" narrow box width option available
110 VAC, single phase, 60 cycle
Continuous belt drive; 72' per minute (21.9 m/min.) (production rate depends on box size & operator dexterity)
230 lbs (104 kg) uncrated
Case Capacity: (with 2" wide CaseLocker ST® Cartridge)
Height: 4-1/2" (114mm) to 24" (610mm)*
Width: 4" (102mm) to 20" (508mm)
Length: 3" (76mm) to infinite
*High mast version accommodates box heights to 34" (864mm)
Need Help Selecting a Case Sealer?
Our Packaging Specialists have a deep understanding of case sealing equipment and the best strategies to reduce costs.